New Features And Enhancements - Emerson PACSystems RX3i Important Product Information

GFK-2884K
Upgrades
Upgrade kit: 41G1897-MS10-000-A7.zip is available at the support links provided at the end of this document.
Release History for IC694CEE001
Version
IC694CEE001-BA
IC694CEE001-AA
Compatibility
The PROFINET Scanner modules require the CPU firmware and programming software versions listed in the following
table.
PAC Machine Edition
RX3i CPU Version
RX3i PNC Version
RXi Controller Version
RX3i I/O Modules
HART Pass Through
Problems Resolved in This Release
Subject
' MRP Enabled' bit in CEP
input status data is not
working as specified in the
manual GFK-2883

New Features and Enhancements

None
Date Comments
Following Emerson's acquisition of this product, changes have been made to apply
Sep
appropriate branding and registration of the product with required certification agencies.
2019
No changes to material, process, form, fit or functionality.
Apr
Initial Release
2017
PAC Machine Edition version 8.6 SIM 3 or later
PACSystems RX3i CPU,
CPU320/CPU315 Primary Firmware Release 8.95 or later
CPU320/CPU315 Boot Firmware Release 5.10 or later
CPE310/CPE305 Primary Firmware Release 8.95 or later
CPE310/CPE305 Boot Firmware Release 7. 10 or later
CPE330 Primary Firmware Release 8.95 or later
CRU320 Primary Firmware Release 8.95
CRU320 Boot Firmware Release 5.10 or later
PACSystems RX3i PROFINET IO-Controller, IC695PNC001, with firmware version 2.26 or later
Effective with IC695CEP001 Firmware version 2.30, the PACSystems RXi Distributed I/O
Controller, ICRXICTL000, is no longer compatible with IC695CEP001. ICRXICTL000 with
firmware version 7.80 or later may be used with CEP001 version 2.01 or earlier.
For a complete list of modules supported by the current firmware release, refer to the
section, Supported I/O Modules, above.
HART Pass Through entails usage of PC-based applications, RX3i Analog modules with HART
functionality and (optionally) supporting PROFINET products. HART Pass Through operation
is described in the PACSystems HART Pass Through User Manual, GFK-2929.
ID code
SFDC case number:
01323576
Rally case number: DE5803
Description
The 'MRP Enabled' bit in CEP input status data is always showing
the value 0 even though the MRP configuration is enabled in PNC
and CEP
Feb 2022
16