Overload Protection - Bosch ErgoMixx MSM6 Series User Manual

en Avoiding material damage
▶ Never let the power cord come into contact with hot parts or be
dragged over sharp edges.
▶ Never place the appliance on or near hot surfaces.
▶ After switching off, wait until the drive has come to a complete
standstill.
▶ Keep hands, hair, clothing and utensils away from rotating parts.
▶ Never touch the edges of the blades with bare hands.
▶ Care should be taken when handling sharp blades, emptying the
container and during cleaning.
▶ Be careful when processing hot food.
▶ Leave boiling food to cool down to at least 70 °C before pro-
cessing.
▶ Follow the cleaning instructions.
▶ Clean surfaces which come in contact with food before each
use.
Avoiding material damage
▶ Do not operate the appliance at no-load.
▶ Never use the blender jug in the mi-
crowave or oven.
▶ Place the base unit fully on the blender
foot or accessory and lock into position
with a click.
Overview
→ Fig.
1
Speed setting
1
On button
2
Turbo button
3
Release buttons
4
Plastic blender foot or stainless-
5
steel blender foot
1
Lid
6
Plastic blender jug
7
1 2
Whisk
8
Universal cutter L
9
Universal cutter XL
10
1
Depending on the model
2
separate operating instructions
12
1
1
1 2
1 2
"ProPuree" masher attachment
11
1
Depending on the model
2
separate operating instructions
Note: If an accessory is not included in the
scope of supply, it can be ordered from
customer service.
Controls
Speed setting
For continuous speed adjustment. Set the
rotary selector between ● (lowest speed)
and 12 (highest speed).
On button
To use the appliance at the preselected
speed.
Turbo button
To use the appliance at maximum speed.
Note: The appliance remains switched on
as long as one of the buttons is pressed.

Overload protection

Only CNHR26 and CNHR26C
If the appliance switches itself off during
use, the overload protection device has
been activated.
Printed on 100% recycled paper
1 2