Advertisement
Procedure to Remove Fan Motor
5. Procedure to Remove Fan Motor
Procedure
Step
Dismount the backside
plate and bottom plate
according to the removal
procedure for the drain
pan.
Dismount the switch box
lid according to the
removal procedure for it.
1. Removal of motor
connectors
Remove the fan motor
1
connectors.
Cut the 3 clamps.
2
2. Removal of fan housing
FBQ71
Dismount fan housings (1)
and (2) only.
FBQ100 to 140
Fan housings (1), (2), and
(3)
1
Press the protruding
part of the fan housing.
2
Open the fan housing
downward while
pressing the protruding
part.
Lift and dismount the
3
fan housing upward.
6
Warning
Be sure to wait for 10 minutes or more after turning off all power
supplies before disassembling work.
Procedure
Clamp
Inside of EL. compo. box
Fan housing (1)
Radiator fins
Backside of EL. compo. box
Fan motor
Fan housing (2)
Fan housing (3)
(except FBQ71)
Si281313E
Points
Clamp
Fan motor
Clamp
Removal Procedure
Advertisement
