Advertisement
Procedure to Remove Fan Rotor and Fan Motor
3. Procedure to Remove Fan Rotor and Fan Motor
Procedure
Step
Removing fan rotor
1
Turn bell mouth in CW
to remove it.
2
Remove hexagon nut
and turning stopper
plate to disassemble
fan rotor.
Removing fan motor
Disconnect lead wire for
1
fan motor and harness
for capacitor from
switch box.
2
To dismount pipe-fixing
plate, remove a screw
and slide the plate to
left side.
To remove wire-fixing
3
plate, remove 2 screws
and slide the plate
upward.
4
Remove 4 hexagon
head screws to
dismount fan motor.
6
Warning
Be sure to wait for 10 minutes or more after turning off all power
supplies before disassembling work.
Procedure
Fan rotor
Bell mouth
Hexagon nut Turning stopper plate
Harness for capacitor
Hexagon
head screws
When reassembling be sure
to clamp wires.
Lead wire
for fan motor
Lead wire for fan motor
Pipe fixing plate
Si241306
Points
Caution
Clamp
Clamp
Removal Procedure
Advertisement
