Advertisement
Si281313E
7. Procedure to Remove Thermistors
Procedure
Step
1. Removal of suction air
thermistor
Dismount the backside
plate according to the
removal procedure for the
drain pan.
Remove the single
1
setscrew of the suction
air thermistor (R1T).
2. Removal of heat
exchanger thermistor
Dismount the service lid
according to the removal
procedure for the drain
pan.
1
Remove the single
setscrew to dismount
service lid (2).
Press the support
2
spring to pull out the
heat exchanger
thermistor (R2T).
3. Removal of air outlet
thermistor
Dismount the backside
plate and bottom plate
according to the removal
procedure for the drain
pan.
Remove the single
1
screw of the suction air
thermistor (R3T).
Removal Procedure
Warning
Be sure to wait for 10 minutes or more after turning off all power
supplies before disassembling work.
Procedure
Fixing screw
Suction air thermistor (R1T)
Heat exchanger thermistor (R2T)
Air outlet thermistor (R3T)
Procedure to Remove Thermistors
Service lid (2)
Screw
Points
Screw
9
Advertisement
