Table of Contents
Advertisement
Maintenance
Air filter cleaning: Please clean the air filter every two weeks
When dirt accumulates in the air filter, air circulation will be blocked, and causes poor
cooling. It is advisable to clean the air filter every two weeks for efficient operation.
Removal of air filter
For HW-18CI13:
(1) Loosen the air inlet by pushing " PUSH " at
both edges as shown.
(2) Open the air inlet.
(3) Hold the handle at lower part of the air filter
and draw outward to remove the air filter.
For HW-18CE03:
(1) Loose the air filter by pushing " PUSH "
at both ends of air inlet.
(2) Hold the air filter by frame and lift it
forward for approx. 5 mm.
(3) Pull it out downward .
Air filter cleaning
1. Gently tap the dirt off the air filter.
2. Carefully wash the air filter in warm water
o
(below 40
C). To obtain better cleaning
effect, soapy water or neutral detergent
may be used.
3. Flush the air filter carefully with clean water
after removing the dirt. Let it dry completely.
Installation of filter
For HW-18CI13:
(1) Put the air filter on.
(2) Push the part marked " PUSH " until you hear a click.
For HW-18CE03:
(1) Hold the filter by its frame and push it upward along the
groove under air inlet until it comes to a complete stop.
(2) Push the part marked with " PUSH " until you hear a click.
PUSH
10
PUSH
Air inlet
PUSH
VENTILATOR
Temp. setting
Mode selection
Auto swing
WAIT 3 MINUTES BEFORE RESTARTING
PUSH
Washing
air filter
Advertisement
Table of Contents
