Operation - Haier HSU-09H03/R1 Operation Manual

Operation

Cool/Dry mode Operation
Remote Controller
1. Unit start
Link with electric power.
Press ON/OFF on the remote controller, unit start.
The liquid crystal will display the working state of last
time (Except Timer, Power/Soft ).
2. Select operation mode
Press MODE button. For each press, operation mode
changes as follows:
Remote controller:
Then select COOL or DRY operation
3.Select temp.setting
Press TEMP. button
Every time the button is pressed, temp.setting
increase 1 C,if kept depressed, it will increase
rapidly
Every time the button is pressed, temp.setting
decrease 1 C,if kept depressed, it will decrease
rapidly
Select a desired temperature.
4. Fan speed selection
Press FAN button. For each press, fan speed changes
as follows:
Remote controller:
Air conditioner is running under displayed fan speed.
When FAN is set to AUTO,the air conditioner
automatically adjusts the fan speed according to room
temperature.
5. Unit stop
Press ON/OFF button, the unit stops.
8
COOL DRY HEAT
AUTO HI MED LOW