Heat Operation - Haier HSU-09H03/R1 Operation Manual

Operation

Heat Operation

Remote Controller
1. Unit start
Link with electric power.
Press ON/OFF on the remote controller, unit start.
The liquid crystal will display the working state of last
time (Except Timer, Power/Soft airflow).
2. Select operation mode
Press MODE button. For each press, operation mode
changes as follows:
Remote controller:
Then select HEAT operation
3.Select temp.setting
Press TEMP. button
Every time the button is pressed, temp.setting
increase 1 C,if kept depressed, it will increase
rapidly
Every time the button is pressed, temp.setting
decrease 1 C,if kept depressed, it will decrease
rapidly
Select a desired temperature.
4. Fan speed selection
Press FAN button. For each press. fan speed change as
follows:
Remote controller:
Air conditioner is running under displayed fan speed.
In HEAT mode, warm air will blow out after a short period
of the time due to cold-draft prevention function.
When FAN is set to AUTO,the air conditioner
automatically adjusts the fan speed according to room
temperature.
5. Unit stop
Press ON/OFF button, the unit stops.
On cooling only unit, heating mode is not available.
9
COOL DRY HEAT
AUTO HI MED LOW