Air Flow Direction Adjustment; Horizontal Adjustment - Haier HSU-09H03/R1 Operation Manual

Operation

Air Flow Direction Adjustment

Vertical Adjustment
When ON/OFF switch is pressed, the vertical
louver will move to the adequate positions
for each operation automatically.
Swing of Air Flow
If air flow direction switch is pressed once,
the vertical louver will move within the range
of figures as right.
Fixing the Flow Direction
If air flow direction switch is pressed again,
the vertical louver will be fixed and that
position is more memorized. From the next
operation the louver will be set at previous
position automatically.
NOTICE
When the operation is off, the vertical louver closes the outlet automatically.
Don't move the vertical louver by hands. It may make the louver not work
properly. In order to move the vertical louver, use remote controller without fail. In
case the louver does not work correctly, once stop the operation and turn on again.
During cooling or dry operation, the vertical louver should not be downward for a long time.
If this is done, dew drops may appear at the outlet.

Horizontal Adjustment

Adjust the horizontal louver by moving the
adjustment tabs.
If the system is operated with the horizontal
louver faced completely to the left or right under
high humidity (e.g. during the rainy season),
dew drops may appear at the outlet.
During Cooling, Dry Operation
Level
Approx. 10
degrees
Level
Approx.
10
degrees
Approx.
45
degrees
During Heating Operation
Level
Approx. 60
degrees
Level
Approx. 10
degrees
Approx. 60
degrees