Dell EMC VEP4600 Operating System Installation Manual page 73

1. Login credentials for ESXi will be the VEP4600 Service Tag + !. To get the Service Tag, pull out the luggage tag on the top right
corner of the VEP4600 server. The Service Tag can also be found in the BIOS.
2. To view Service tag in the BIOS, go to Server Mgmt tab.
3. Scroll down to View FRU information and press Enter.
NOTE: System serial number is the service tag.
4. To log into the serial console:
a) After ESXi boots, press F2.
b) Enter the required login and password credentials at the login screen then press Enter.
Configure BIOS and Install ESXi OS 73