Mount_Usb_On_The_Vep4600; Run The Unified Firmware Updater Through Usb - Dell EMC VEP4600 Operating System Installation Manual

• BIOS – 3.41.0.9-15
• WiFi CPLD image – 0x01
• rNDC CPLD image – 0x02
• rNDC nvm images (DUP package – 18.08.200)
5. From a Windows or Linux server, copy the vep4600_ufw_2.8 file to a USB. (USB size 2GB is sufficient)

Mount_USB_on_the_VEP4600

1. Insert the USB into the USB port in the VEP4600 front panel.
2. From the serial console DiagOS:
a. Run the command mkdir /mnt/usb to create the mount point
b. Run the command mount /dev/sdb /mnt/usb
3. The USB can take a different device name, but usually VEP4600 DIAG OS assigns sdb for the USB. If you run fdisk -l the USB is
usually one of the last drives in the list.
Device Boot Start
/dev/sdb1

Run the Unified Firmware Updater through USB

1. From mounted USB, run the Unified Firmware Updater with the following commands:
a. root@dellemc-diag-os:~# cd /mnt/usb
b. root@dellemc-diag-os:/mnt/usb# chmod 777 vep4600_ufw_x.x
c. root@dellemc-diag-os:/mnt/usb# ./vep4600_ufw_x.x interactive
2. The following menu is displayed below:
root@dellemc-diag-os:/mnt/usb# chmod 777 vep4600_ufw_x.x
root@dellemc-diag-os:/mnt/usb# ./vep4600_ufw_x.x interactive
Creating directory images
Verifying archive integrity...
Uncompressing release
Selecting previously unselected package zlib1g-dev:amd64.
(Reading database ... 20150 files and directories currently installed.)
Preparing to unpack .../zlib1g-dev_1%3a1.x.x.dfsg-2+b1_amd64.deb ...
Unpacking zlib1g-dev:amd64 (1:1.x.x.dfsg-2+b1) ...
Setting up zlib1g-dev:amd64 (1:1.x.x.dfsg-2+b1) ...
Processing triggers for man-db (2.7.0.2-5) ...
fopen: Permission denied
Selecting previously unselected package libssl-dev:amd64.
(Reading database ... 20181 files and directories currently installed.)
Preparing to unpack .../libssl-dev_1.0.1t-1+deb8u6_amd64.deb ...
Unpacking libssl-dev:amd64 (1.0.1t-1+deb8u6) ...
Setting up libssl-dev:amd64 (1.0.1t-1+deb8u6) ...
Selecting previously unselected package libssl-doc.
(Reading database ... 20267 files and directories currently installed.)
Preparing to unpack .../libssl-doc_1.0.1t-1+deb8u6_all.deb ...
Unpacking libssl-doc (1.0.1t-1+deb8u6) ...
Setting up libssl-doc (1.0.1t-1+deb8u6) ...
Processing triggers for man-db (2.7.0.2-5) ...
fopen: Permission denied
Selecting previously unselected package bc.
(Reading database ... 21629 files and directories currently installed.)
Preparing to unpack diag/bc_1.06.95-9_amd64.deb ...
Unpacking bc (1.06.95-9) ...
Setting up bc (1.06.95-9) ...
Processing triggers for man-db (2.7.0.2-5) ...
fopen: Permission denied
Package version: x.x
Packaged images:
18 Upgrade Firmware through DiagOS
End Sectors
32 30031871 30031840 14.3G
100%
100%
Size Id Type
c W95 FAT32 (LBA)
MD5 checksums are OK. All good.