Vep4600 Configuration Guidelines - Dell EMC VEP4600 Operating System Installation Manual

Topics
• Types of VEP4600 with pre-installed OS from manufacturing
• Guidelines for upgrading VEP4600 based on manufacturing configuration
This section describes the steps to take to complete the VEP4600 configuration. The VEP4600 will arrive from manufacturing with one of
the following configurations.
• Config1: VEP4600 preinstalled with ESXi
• Config2: VEP4600 preinstalled with DiagOS
• Config3: VEP4600 preinstalled with Versa flex NFV
Config1 – ESXi v6.7 Ux is installed on the VEP4600:
• Update firmware from the BMC - See
Config2 – DiagOS is installed on the VEP4600:
• Update to the latest version of DiagOS - See
• Update the firmware.
Config3 – Versa flex NFV is installed on the VEP4600:
• Update firmware from the BMC - See
10

VEP4600 configuration guidelines

VEP4600 configuration guidelines
Upgrade Firmware through BMC
Upgrade Firmware through DiagOS
Upgrade Firmware through BMC
3