Table of Contents
Advertisement
Figure 10. Platform rail attachment
3. Repeat on the other side of the platform.
4. Attach the platform rails to the four-post rack rails using two user-supplied screws on each side.
Figure 11. Platform four-post front installed
5. Slide the rear platform rail from the back to the front bracket. Secure with two user-supplied screws on each side.
Figure 12. Platform four-post rear installed
About three inches before you fully insert your platform, the rail locking feature engages to keep the platform from inadvertently sliding
out and falling.
To remove the platform, unscrew the rack-mounting screws and slide the platform forward.
Optics installation
The VEP4600 has SFP+ optical ports.
For a list of supported optics, see the specification sheets at
representative.
CAUTION:
ESD damage can occur if components are mishandled. Always wear an ESD-preventive wrist or heel ground
strap when handling the VEP4600 and components.
WARNING:
When working with optical fibers, follow all warning labels and always wear eye protection. Never look
directly into the end of a terminated or unterminated fiber or connector as it may cause eye damage.
https://www.dell.com/support
or contact your Dell EMC Sales
VEP4600 installation
21
Advertisement
Table of Contents
