Table of Contents
Advertisement
Universal Remote Control
The universal remote control allows you to operate the most
important functions such as power on/off and volume
control on your television, video recorder, or DVD player. To
be able to control the device, you must adapt the remote
control to the device first.
Take the following steps:
1 Turn on the device you want to operate.
2 Point the remote control at the remote sensor on the device.
3 Hold down the device button you want to control until its
light flashes on.
4 Find the manufacturer of the device from the codes list.
5 Enter the three-digits code you have found for your device
£
¢ ¡
and press the
OK
6 If you get no response to the remote control from the
device, repeat from the step 2.
If you cannot find a code for your device, do as follows:
1 Turn on the device you want to operate.
2 Point the remote control at the remote sensor on the device.
3 Hold down the device button you want to control until its
light flashes on.
button, then the light blinks three times.
Appendix A
39
Advertisement
Table of Contents
