Resetting To User Settings - Topfield CBI-2070 User Manual

16 Service Search

3.3 Resetting to user settings

• Preference settings
You can reset all data of the digital receiver. Select the Instal-
lation > System Recovery > Factory Setting menu, and then
you get asked for confirmation. With the choice of Yes, the
services list, favourite list and timer list will all be cleared, and
preference options will be reset to the manufacturer's factory
settings.
NOTE
A factory reset will not delete any recorded programmes.
However, you have to search services again after a factory
reset.
You can store your own data including the following:
• Services list
• Favourite lists
• Preference settings
Also you can restore them at any time.
To store your data, select the Installation > System Recovery >
Store System Data menu, then you get asked for confirmation.
If you select Yes, your data will be stored. Whenever you store
your data, they are all overwritten. To restore your data, select
the Installation > System Recovery > Recover System Data
menu, then you get asked for confirmation. With the choice of
Yes, your data will be restored.
You can also store your data to an external storage. To store
your data to an external storage, select the Installation > Sys-
tem Recovery > Export System Data menu, then you get asked
for confirmation. With the choice of Yes, your data will be
stored. Every time you store your data, they are all overwrit-
ten.