Table of Contents
Advertisement
Preset Tuning
You can store Preset stations from Channel 1 to 30
respectively.
Automatic Memory Presetting
1
Select Tuner FUNCTION by press the FUNCTION but-
ton repeatedly (or press the TV/FM button of the
remote control unit).
2
Press the PRGM button for more than 2 second.
Up to 30 of the best received stations in your area
will be stored automatically. Then you can select
each stations easily.
3
You can select each stations by pressing ./
buttons.
Manual Memory Presetting
1
Select Tuner FUNCTION by press the FUNCTION but-
ton repeatedly (or press the TV/FM button of the
remote control unit).
2
If "PRESET" indicator is lit, press the TUNING MODE
button to select the manual tuning mode.
The "PRESET" indicator disappears from the display.
3
Select the station what you want to listenby press-
ing the ./ buttons.
4
Press the PRGM button briefly.
5
While the "PRGM" indicator is appears, select a pre-
set channel (ex. 01, 02 ... 30) to store the station
using the Numeric buttons.
To store more stations, repeat steps
6
Press PRGM button.
Preset Tuning
How to select preset stations
Press a preset number.
To select a station stored in preset 2 for example,
press 0, followed by 2. You could directly press 2 to
select preset 2. But when you do this and then press
6 for example, the unit understands that you entered
"26".
Preset stations can also be selected by the TUNING
button. Press the TUNING button repeatedly until the
desired preset station is found.
< If the PRESET indicator isn't lit, press the TUNING
MODE button beforehand.
How to select clear preset stations
1
Press the TUNING MODE button on the Remote
Control.
2
Select the station what you want to Clear by press-
ing the ./ buttons.
3
Press the CLEAR button for more than 2 seconds.
3
to
5
.
56
Advertisement
Table of Contents
