Table of Contents
Advertisement
The seat belt should always be worn when the Roll Bar is in
the raised position. The seat belt should never be worn when
the Roll Bar is in the down position.
Fuel Tank Cap: To remove the cap, turn counter-clockwise.
Power Outlet: Unit is equipped with a +12V DC, 20A
power outlet.
Removable Floor Plate: The floor plate can be removed
for easy access to the mower deck. To remove the plate,
remove the retainer hardware and tilt the floor pan up and
then remove from the machine. Reverse the process for re-
installation.
Instrument Control Panel
10
A. PTO (Power Take Off) Switch
B. Throttle Control Lever
C. Digital Display Panel
D. Ignition Switch
PTO (Power Take Off) Switch: The PTO switch
engages and disengages the mower blades. Pull UP on the
switch to engage, and push DOWN to disengage.
Throttle Control Lever: The throttle control lever controls the
engine speed.
Move the throttle towards FAST to increase engine speed.
Move the throttle towards SLOW to decrease engine speed.
Always operate at FULL throttle when mowing.
Fast throttle speed.
Slow throttle speed.
Digital Display Panel
11
A.
Menu Button: Press this button to access the
different options available in the digital display panel,
such as Service Reminders, PTO Run Time Hours, and
Fault Codes and Descriptions.
B. Menu Navigation Buttons: These buttons are used
when accessing the features after pressing the MENU
button. See Using the Digital Display Panel for more
information.
C.
Clock: The clock displays the time of day.
D.
Water Temperature Gauge: This gauge displays
the engine coolant temperature.
E.
Service Reminder Light: This light illuminates
when a regular service maintenance item needs to be
performed.
F. Total PTO Hours: This displays the total number of
hours that the PTO is engaged.
G. Speedometer - Engine RPM Speed: This gauge
displays the engine RPM.
H. Resettable PTO Hours: This displays the current
number of PTO. I can be reset by the operator.
I.
Current Engine RPM: This displays the engine RPM's as
a numerical readout.
J. Current Engine Hours: This displays the total number of
hours that the engine has run.
K.
PTO Clutch Circuit Indicator Light: This light will
illuminate when the PTO switch is turned on.
L.
Parking Brake Circuit Indicator Light: This light
will illuminate when the parking brake is not engaged.
17
Advertisement
Table of Contents
