Table of Contents
Advertisement
IF THE VINYL LINER DOES NOT FIT:
In the unlikely event that the vinyl liner does not fit:
DO NOT FILL THE POOL WITH WATER!
DO NOT CUT THE LINER!
DO NOT ATTACH ANY FITTINGS!
First, determine that the vacuum is effective. Reassess the liner's position
in the pool. Be sure the liner ends are not reversed by making sure that the
shallow end side is in the shallow end and not in the deep end, etc. This is a
common mistake made by installers of every experience level. Look at the
floor of the vinyl liner; in most instances there are fewer seams in the
shallow end. If repositioning is necessary, shut off the vacuum and move
the liner accordingly.
Check for unusual features of the pool that may have been omitted from
the order such as a cove in the shallow end or a straight step cut on a
corner step or radius section of the wall.
Compare the corners of the pool with those of the liner to be sure that
they are the same arc, shape, and/or length.
If the liner is still not fitting properly:
Contact Royal Swimming Pool's Customer Support immediately!
47
Advertisement
Table of Contents
