Royal 16X32X24L-S Manual page 15

We will continue to reference the dig spec to the left, however
make sure to use your provided dig spec to determine the
measurements for your pool.
Having your center line accurate is essential as the remaining
measurements work off of this line. You should double check that
your center points measure square to your fixed point before
moving forward.
Tie string or attach your tape
measurer to one of the center
points and measure out the
desired radius (from your dig spec)
for the rounded portion of your
pool. In this example, the radius is
9'. →
Keeping the string or measurer
tight, use spray paint to swing your
9' radius arc from one straight wall
edge to the other. You can double
check these marks by measuring
from the center point stake in any
direction and you should measure
9' from stake to spray paint mark
every time.
Once you have your radiuses properly marked you can measure
the straight edge walls, making sure that the numbers match
your dig spec, and mark/string them according.
You can also use string to showcase your future slope line
locations.
15