Configuring The Remote Server; Creating A Remoteserver - Cisco Access Registrar 4.2 Installation And Configuration Manual

Cisco systems network device installation and configuration guide
Hide thumbs Also See for Cisco Access Registrar 4.2:
Table of Contents

Advertisement

Chapter 5
Customizing Your Configuration
Although these services differ in the way they handle authentication and authorization, the
Note
procedure for configuring a remote server is the same independent of its type. For more
information about the differences between these servers, see the
Cisco Access Registrar User Guide.
Table 5-4
detail.
Table 5-4
Object
RemoteServers
Services
Radius

Configuring the Remote Server

The RemoteServer object allows you to specify the properties of the remote server to which Services
proxy requests. The remote servers you specify at this level are referenced by name from the
RemoteServers list in the Services objects.

Creating a RemoteServer

Run the aregcmd command:
Step 1
Use the cd command to change to the RemoteServers level:
Step 2
Use the add command to add the remote server you will reference in the Services level. The following
Step 3
example adds the remote server's hostname
Use the cd command to change to the QuickExample RemoteServers object level.
Step 4
OL-17221-02
provides an overview of the process. The following sections describe the process in more
Configuring a Remote Server
Action
Add a new RemoteServer.
Set the protocol (ldap).
Set the properties.
Add a new Service.
Set the type (ldap).
Set the RemoteServers property.
Set DefaultAuthentication.
Set DefaultAuthorization.
aregcmd
cd /Radius/RemoteServers
add QuickExample
cd /Radius/RemoteServers/QuickExample
.
QuickExample
Installing and Configuring Cisco Access Registrar, 4.2
Configuring a Remote Server for AA
5-9

Advertisement

Table of Contents
loading

Table of Contents