Configuring Separate Userlists; Creating Separate Userlists; Configuring Users; Populating Userlists - Cisco Access Registrar 4.2 Installation And Configuration Manual

Chapter 5 Customizing Your Configuration
Table 5-3
Object
UserLists
Users
Services
Radius
Scripts

Configuring Separate UserLists

Divide your site along organizational or company lines, and create a UserList for each unit.

Creating Separate UserLists

Step 1 Run the aregcmd command.
Use the cd command to change to UserLists.
Step 2
Use the add command to create a UserList, specifying the name and optional description. The following
Step 3
example specifies the name
Repeat for the other UserLists you want to add.
Step 4

Configuring Users

After you have created multiple UserLists, you must populate them with the appropriate users.

Populating UserLists

Use the cd command to change to the UserList you have created.
Step 1
Use the add command to add a user. Using the sample users as models, configure the appropriate group
Step 2
membership. The following example adds user
password
OL-17221-02
Configuring Separate UserLists
Action
Add new UserLists.
Add users.
Add new Services.
Set service type (local).
Set Incoming Script.
Add a new Script.
aregcmd
cd /Radius/UserLists
North
add North "Users from the northern office"
cd /Radius/UserLists/North
, Enabled set to
123 TRUE
and the description
Users from the northern office
, with the optional description
beth
, and group membership to
Installing and Configuring Cisco Access Registrar, 4.2
Configuring Multiple UserLists
telemarketing
.
PPP-users
.
, the
5-5