Starting Up; Turning Your Phone On And Off; Auto Configuring Data Connection Settings - HTC Snap User Manual

1.4 Starting Up

After installing your SIM card and battery and charging the battery, you can now
power on and start using your phone.

Turning your phone on and off

To turn on the power
1.
Press and hold the END/POWER button for a few seconds.
2.
When you turn on your phone for the first time, the phone installs
customization
To turn off the power
1.
Press and hold the END/POWER button for a few seconds.
2. Select Yes on the confirmation screen.

Auto configuring data connection settings

The first time you power on your phone, you will
see a notification message from Connection Setup.
Connection Setup automatically configures your
phone's data connections, such as 3G/GPRS, WAP, and
MMS, so that you do not need to enter the settings
manually for your phone.
To automatically configure data connection
settings
1. When you see the notification message from Connection Setup, click Yes.
Note
If your SIM card supports multiple network operator profiles, a message appears
with network profile choices. Select the profile you want to use and click OK.
2.
Connection Setup then configures your phone's data connection settings.
settings, then restarts.
Getting Started 27