Tips And Tricks; Environmental Protection - Metabo BDE 1100 Original Instructions Manual

Table of Contents

Advertisement

Available languages
  • EN

Available languages

  • ENGLISH, page 9
8.5
Tool change with a geared chuck (2)
x 3
Chucking the tool:
Insert the tool and use the chuck key to uniformly
clamp tight all 3 bores.
Removing the tool:
Open the geared chuck with the chuck key and
remove the tool.
8.6
Remove the handle.
To be able to remove the handle you must first of
all remove the chuck.
8.7
Removing the chuck
Geared chuck (2)
Undo the locking screw. Caution left-handed
thread !
Hold the drill spindle tight with a spanner. With a
light blow from a rubber hammer release the chuck
from the inserted chuck key and unscrew it.

9 Tips and Tricks

In the case of deep bores pull the drill bit out of the
bore from time to time in order to remove the stone
dust or shavings.
For thread tapping, slightly oil the tap. Select low
speed and
. Start cutting in clockwise
direction, stop and turn out in counter-clockwise
direction.
10 Accessories
Use only genuine Metabo accessories.
If you need any accessories, check with your
dealer.
For the dealer to select the correct accessory, he
needs to know the exact model designation of your
power tool.
For complete range of accessories, see
www.metabo.com or the main catalogue.
11 Repairs
Repairs to electrical tools must be carried out by
qualified electricians ONLY!
Any Metabo power tool in need of repair can be
sent to one of the addresses listed in the spare
parts list.
Please attach a description of the fault to the power
tool.

12 Environmental Protection

Metabo's packaging can be 100% recycled.
Worn out power tools and accessories contain
considerable amounts of valuable raw and plastic
materials, which can be recycled.
These instructions are printed on chlorine-free
bleached paper.
Only for EU countries: Never dispose of
power tools in your household waste! In
accordance with European Guideline
2002/96/EC on used electronic and electric
equipment and its implementation in national legal
systems, used power tools must be collected
separately and handed in for environmentally
compatible recycling.
ENGLISH
ENG
11

Advertisement

Table of Contents
loading

Table of Contents