Cisco 700 MHz Installation And Upgrade Manual page 61

Chapter 2 Installing the Cisco Unified MeetingPlace 8100 Series Hardware
Looking at the back of the Cisco Unified MeetingPlace Audio Server, connect the DB25 end (the larger
Step 7
connector) of the modem cable to the back of the modem. See
end.
Figure 2-29
Connect the DB9 end (the smaller connector) of the modem cable to the COM 2 port on the CPU
Step 8
transition module in the back of the Cisco Unified MeetingPlace Audio Server. See
which end is the DB9 end.
Step 9 Connect the other end of the phone extension cable to its source, which must be a standard analog phone
line, not an extension for a digital phone.
Step 10 Turn the modem power switch to the on position.
OL-13417-01
Modem Cable
Installation and Upgrade Guide for Cisco Unified MeetingPlace Audio Server 6.x
Installing and Connecting the Modem
Figure 2-29 to see which end is the DB25
Figure 2-29 to see
2-37