Automatic Two-Sided Printing - HP c6463a User Manual

3 3
Make sure Automatic Two-Sided Printing Module Automatic Two-Sided Printing Module is selected, then
click Apply Apply.
4 4
Close the Toolbox window: click the X X in the upper right corner of
the window.

Automatic two-sided printing

Automatic two-sided printing
Note: Note:
Be sure to only use plain paper. You can use letter size (8.5 in. x
11 in.) or A4 size (210 mm. x 297 mm.) Not all paper types or sizes
work with the Two-Sided Printing Module. Using other types of
paper may cause damage to the printer.
Step 1: Load plain paper in the paper tray Step 1: Load plain paper in the paper tray
1 1
Pull out the front paper guide on the paper tray.
2 2
Place a stack of plain paper in the paper tray.
• •
Load the plain paper with the side you want to print first facing down
• •
Always load paper in the portrait direction, with the long edge of the paper against the long edge of the paper tray.
• •
Be careful not to load too much paper. The stack should be below the front paper guide.
HP C6463A Two-Sided Printing Module User's Guide
facing down.
3