Using The Wireless Printing Upgrade Kit; Restart The Connection; Cancel A Print Job; Change The Channel - HP SDCAB-0603 Manual

4

Using the Wireless Printing Upgrade Kit

You can use the Connection Manager icon in the System Tray to perform the following tasks.
• Check the signal strength and settings.
•

Change the Channel.

• Access the Print Queue.
• Connect or Disconnect.

Restart the connection

If the Connection Manager icon has a red X across it, your connection has been lost.
Right-click the Connection Manager icon and select Connect.

Cancel a print job

Use the Print Queue to cancel or pause a print job. If you get a message that the print job has failed, you should cancel
the job to delete it from the print queue.
1. Right-click the Connection Manager icon and select Print Queue.
2. Right click the print job in the Print Manager and select Cancel.
Change the channel
If you receive interference from other wireless devices, you can change the channel that the Upgrade Kit transmits on.
1. Right-click the Connection Manager icon and select Change Channel.
2. Select a different channel.

Restart the Connection Manager

If the icon does not appear in the system tray, you need to restart the Connection Manager.
Go to Start --> All Programs --> HP Wireless Printing Upgrade --> Restart connection manager.
11