Disabling Security - HP iPAQ hx4700 Frequently Asked Questions Manual

10. Tap Next.
11. From the Security Configuration Complete screen, tap
Continue to create your PIN or password and answer your
hint question.
12. Prior to entering your PIN or password, you will be asked for
a passphrase. Tap OK, then follow the onscreen instructions
to create a passphrase.
Note:
remember on a daily basis, but you should remember it for future
reference. For more information on passphrases, tap the More
Information... button.
13. Tap OK.
14. If requested, enter your PIN or password two times for
verification purposes.
15. From the Set up Passwords screen, select your hint question
by tapping the left and right arrow buttons near the question.
Answer the question two times for verification purposes.
16. Tap OK. Your iPAQ Pocket PC will reset itself after a few
seconds, or you can tap the Reset Now button to reset the
device immediately.
Note:
be asked for your PIN or password before you can begin using it
again.

Disabling Security

You can disable HP ProtectTools at any time using your PIN or
password.
The passphrase is not something you will need to
After the device has completed the reset process, you will
47