How Do I Set Up My Pocket Pc To Use Wi-Fi - HP iPAQ hx4700 Frequently Asked Questions Manual

How Do I Set Up My Pocket PC
to Use Wi-Fi?
Your iPAQ Pocket PC comes with Wireless Fidelity (Wi-Fi)
already installed. This means you do not need to use cables or
plug in to a network wall connection to access the Internet with
your Pocket PC. All you need are wireless access points to
transmit data to and from your Pocket PC using Wi-Fi.
Note:
points installed in their buildings. Visit your local computer store
for information on installing wireless access points in your home.
Powering Wi-Fi On or Off
To use Wi-Fi on your Pocket PC, you need to turn on Wi-Fi and
set up your device.
Note:
of the unit. If you cover up the top of the Pocket PC after you
have turned on Wi-Fi, signal strength diminishes.
To turn Wi-Fi on or off:
1. From the Today screen, tap the iPAQ Wireless icon (
the Command bar located at the bottom of the screen.
2. Tap the Wi-Fi button on the iPAQ Wireless screen.
When Wi-Fi is powered on, the Wi-Fi icon on the iPAQ
Wireless screen turns from gray to amber to green and the
Wi-Fi light-emitting diode (LED), located on the top left
corner of the unit, is solid blue indicating Wi-Fi or Bluetooth
are on.
Most private corporations already have wireless access
The Wi-Fi antenna for the Pocket PC is located in the top
) in
28