Disabling Security - HP iPAQ hx2000 Frequently Asked Questions Manual

15. Tap OK.
16. If requested, enter your PIN or password two times for
verification purposes.
17. From the Set up Passwords screen, select your hint question
by tapping the left and right arrow buttons near the question.
Answer the question two times for verification purposes.
18. Tap OK. Your iPAQ Pocket PC resets itself after a few
seconds, or you can tap the Reset Device button to reset the
device immediately.
Note:
asked for your fingerprint, PIN, and/or password before you can
begin using it again.

Disabling Security

You can disable security or make changes to any of the settings
you selected during setup.
To make changes to security settings:
1. Tap Manage Security Settings.
2. Swipe your finger or enter your PIN or password to
authenticate yourself.
3. To disable security, tap the Disable Security button.
4. To change any previously selected security settings, tap the
appropriate tab at the bottom of the screen and follow the
onscreen instructions. The screens match those used during
the setup process. For more information, refer to
Security"
After the device has completed the reset process, you are
discussed earlier in this document.
"Setting Up
34