New And Changed Information - Cisco 800 Release Notes

New and Changed Information

Table 6 Feature List by Feature Set for the Cisco 827 and Cisco 827-4V Routers (continued)
Features
RIP, RIPv2
Voice Features (Cisco 827-4V only)
G.711, G.729a, G.723.1 Codecs
with High-Performance DSP
Support
Loop-Start Key-System or Direct
Phone Support
RAS Gatekeeper Communications
Protocol
VoIP H.323
New and Changed Information
New Software Features in Release 12.1(5)YC1
Cisco 827 and Cisco 827-4V Routers
The following new software features are supported by the Cisco 827 and Cisco 827-4V routers for
Cisco IOS Release 12.1(5)YC3 and above:
OpenDSL
This feature implements auto-provisioning of the Cisco 827 and Cisco 827-4V routers.
Auto-provisioning operates at bootup, and includes two procedures: Device Authentication and Image
Maintenance. The router will be authenticated at bootup using its vendor ID and serial number. It then
requests the Proxy Element to download its configuration file, and configures itself from CLIs in this
file. It then polls for configuration changes, and downloads a new image and configuration file, if
available, to retrieve the latest changes.
Release Notes for the Cisco 800 Series Routers for Cisco IOS Release 12.1(5)YC
10
Feature Sets
IP/FW
IP/ Plus
In IP Voice IPSec 56
Yes Yes Yes
No Yes No
No Yes No
No Yes No
No Yes No
IP/FW/ IP/FW
Voice IP/IPX/ Plus
Plus Voice IPSec
IPSec 56 Plus 3DES
Yes Yes Yes
Yes Yes No
Yes Yes No
Yes Yes No
Yes Yes No
IP/IPX/
IP/IPX/ FW/Plus
FW Plus Voice
IPSec IPSec
3DES 3DES
Yes Yes
No Yes
No Yes
No Yes
No Yes
78-12776-04