HP iPAQ hx2000 Additional Information page 84

Learning to Enroll a Fingerprint (not available on
all models)
Fingerprint Reader enrollment training is available on the HP iPAQ to
assist you in proper enrollment of your unique fingerprint. To access the
training, tap the Training button when the Fingerprint screen displays
during HP ProtectTools setup.
NOTE: You can tap OK at the top of the screen at anytime to exit the
training.
To learn to enroll fingerprints:
During the HP ProtectTools setup process, when the Fingerprint
1.
screen displays, tap the Training button.
2. Read the Training -- Swiping Tips screen.
Tap the double arrows button.
3.
4. Follow the on-screen demonstration to swipe a finger.
NOTE: If the finger swipe is acceptable, the oval frame turns green and
the message "Good. Please continue!" displays. If the finger swipe is
unacceptable, the oval frame turns red and the message "Poor quality"
or "No image. Try again!" displays.
5. Repeat the finger swiping exercise as prompted until you have
completed six out of eight successful swipes.
Tap the double arrows button to continue to the Self-test.
6.
7. Perform seven out of eight successful finger swipes in the Self-test to
complete the training.
8. Tap Finish to end the training and return to the Fingerprint
screen in HP ProtectTools setup.
80