Setting Up An Email Account - HP iPAQ hx2000 Additional Information

Setting up an E-mail Account
Before you can send and receive e-mail, you must have access to an e-
mail account through an Internet Service Provider (ISP) or a VPN server
connection (typically a work account).
To set up an e-mail account on your HP iPAQ:
1. Tap Start > Messaging.
2. Tap Menu > Tools > New Account.
3. Enter your e-mail address, and tap Next.
Auto configuration attempts to download necessary e-mail server
settings so that you do not need to enter them manually.
4. Once Auto configuration has finished, tap Next.
5. Enter your name (the name you want displayed when you send e-
mail) and your password.
If Auto configuration was successful, your user name is already entered
and you can tap Next, then Finish to complete setting up your account,
or tap Options to access additional settings. For example:
• Change the time intervals for downloading new messages
• Download attachments
• Limit the amount of messages that are downloaded
If Auto configuration is unsuccessful, refer to the Help file on your HP
iPAQ.
NOTE: You can set up several e-mail accounts in addition to your
Outlook E-mail account.
You cannot add a new account while connected. Tap Menu > Stop
Send/Receive to disconnect.
47