Table of Contents
Advertisement
266551-003.book Page 3 Thursday, February 20, 2003 11:33 AM
Connecting the Notebook to External Power
Ä
CAUTION: To prevent file corruption and be sure that the correct
drivers load, do not turn on the notebook for the first time while it is
docked in an optional port replicator.
To connect the notebook to external power:
1. Place the notebook on a flat surface near an electrical outlet.
2. Plug the AC Adapter cable into the DC power connector 1.
1. Plug the power cord into the AC Adapter 2 and into an
accessible electrical outlet 3.
When the notebook receives AC power, the AC Adapter light 4
turns on.
Connecting the notebook to external power
(AC Adapters, power cords, and electrical outlets vary
by region.)
Getting Started
Setting Up the Notebook
1–3
Advertisement
Table of Contents
