Polaris RZR S 1000 2020 Owner's Manual page 52

FEATURES AND CONTROLS
CLOCK MODE
The clock must be reset any time the battery has been disconnected or
To set the clock time, do the following:
1. Turn the key to the ON position. Use the MODE button to toggle to the
odometer display.
2. Press and hold the MODE button until the hour segment flashes. Release
the button.
3. With the segment flashing, tap the MODE button to advance to the desired
setting.
4. Press and hold the MODE button until the next segment flashes. Release the
button.
5. Repeat steps 3-4 twice to set the 10-minute and 1-minute segments. After
completing the 1-minute segment, step 4 will save the new settings and exit
the clock mode.
6. Turn the key to the OFF position.
ODOMETER MODE
The odometer records and displays the distance traveled by the vehicle.
TRIP METER MODE
The trip meter records the distance traveled by the vehicle if reset before each
trip. To reset, select the trip meter mode. Press and hold the MODE button until
the meter resets to zero. In the Rider Information Center, the trip meter display
contains a decimal point, but the odometer displays without a decimal point.
HOUR METER MODE
This mode logs the total hours the engine has been in operation.
TACHOMETER MODE
The engine RPM is displayed digitally.
Small fluctuations in the RPM from day to day may be normal because of
50
Downloaded from ManualsNet.com
changes in humidity, temperature and elevation.
search engine
TIP
discharged.
TIP