IGNITION SWITCH / LIGHT SWITCH
Use the ignition switch to start the engine and to turn the lights on or off. The key
can be removed from the switch when it is in the OFF position.
OFF
LIGHTS ON
POSITION
LIGHTS ON
START
HIGH BEAM SWITCH
The headlight high beam is controlled by the turn signal lever. To switch the
headlights to high beam, push the lever forward. Pull the lever back to switch to
low beam.
HORN SWITCH
The horn switch is located on the turn
signal lever
signal lever inward to sound the horn.
Downloaded from
ManualsNet.com
Turn the key to the OFF position to stop the engine.
Electrical circuits are off.
All lights are on. Electrical circuits are on. Electrical
equipment can be used.
The headlights are off. Position lights are on.
Electrical equipment can be used.
Turn the key to the START position to engage the
electric starter. See the Starting the Engine section
for details.
q
. Press the tip of the turn
search engine
FEATURES AND CONTROLS
29