Polaris RZR S 1000 2020 Owner's Manual page 140

MAINTENANCE
FILTER SYSTEMS
INTAKE PRE-FILTERS (IF EQUIPPED)
Inspect the engine pre-filter before each use of the vehicle to ensure adequate
air flow. If necessary, remove the pre-filter and clean with soapy water. Dry with
low pressure compressed air.
Periodically inspect the clutch (PVT) air intake for debris and clean as needed to
ensure adequate air flow.
When washing the vehicle, always avoid spraying water directly toward the
PVT intake duct. See the Cleaning and Storage section for recommended
AIR FILTER
Always change the air filter at the intervals outlined in the Periodic Maintenance
Chart section.
1. Remove the cargo box access panel.
2. Clean all dirt and debris from the air box area.
3. Unlatch the two (2) air box cover straps
cover.
4. Inspect the air filter
138
Downloaded from ManualsNet.com
TIP
washing procedures.
w
and air box for dirt, debris or water.
search engine
q
and carefully remove the air box