Polaris RZR S 1000 2020 Owner's Manual page 34

FEATURES AND CONTROLS
SEATS
These seats are designed for this tractor model. Replacement with different
Before operating the vehicle, always push down on all seat backs to ensure the
latches are secure.
SEAT ADJUSTMENTS
The driver's seat is equipped with an adjustment lever and adjustment knob for
optimal spacing.
• Pull the adjustment lever to the left to move the seat forward or rearward.
Once released, the lever will lock into place.
• Rotate the adjustment knob to move the seat forward and upward or rearward
and downward.
To adjust the front passenger seat, loosen (do not remove) the four screws
located on the seat bottom. Slide the seat forward or rearward to the desired
position. Tighten the screws to 5.4 Nm (4 ft. lbs.). Do not overtighten.
SEAT REMOVAL
1. Pull up on the seat latch lever located under the rear edge of the seat.
2. Tilt the seat forward.
32
Downloaded from ManualsNet.com
seats is not possible.
Driver's Seat
Up Position
search engine
NOTE
Driver's Seat
Down Position