Before You Begin - Monogram ZWL1126SRSS Installation Instructions Manual

Drawer microwave
Hide thumbs Also See for ZWL1126SRSS:
Table of Contents

Advertisement

Available languages

Available languages

Questions? Call (800) 444-1845 or Visit our website at : monogram.com/contact

BEFORE YOU BEGIN

Read these instructions completely and
carefully.
IMPORTANT
for local inspector's use.
IMPORTANT
codes and ordinances.
• Note to Installer — Be sure to leave these
instructions with the Consumer.
• Note to Consumer — Keep these instructions
with your Owner's Manual for future reference.
• Skill Level — Installation of this appliance requires
basic mechanical and electrical skills.
• Proper installation is the responsibility of the
installer. Product failure due to improper installation
is not covered under the warranty. See Owner's
Manual for warranty information.
IMPORTANT
Use this oven only for its intended
purpose. Never use the oven for warming or heating a
room. Prolonged use of the oven without proper
ventilation can be hazardous.
WARNING
If the information in this manual is
not followed exactly, a fire or electrical shock may
result that could cause property damage, personal
injury or death.
WARNING
To reduce the risk of tipping, the
Drawer Microwave must be secured by a properly
installed Anti-Tip block.
• This Drawer Microwave must be electrically
grounded in accordance with local codes.
• Make sure the wall coverings and the cabinets
around the Drawer Microwave can withstand the
heat generated by the Drawer Microwave.
WARNING
Never leave children alone or
unattended in the area where a Drawer Microwave
is in use. Never leave the drawer open when the
microwave is unattended.
READ CAREFULLY. KEEP THESE INSTRUCTIONS
2
Installation Instructions
Save these instructions
Observe all governing
WARNING
Stepping, leaning or sitting on the
drawer may result in serious injuries and can also
cause damage to the Drawer Microwave.
• Do not use the Drawer Microwave as a
storage space. This creates a potentially
hazardous situation.
• Check that the time-of-day is in the display. If not,
touch Stop/Clear to prevent unintended use.
UNPACK DRAWER MICROWAVE
Remove all packing materials from inside the
Drawer Microwave. DO NOT REMOVE THE
WAVEGUIDE COVER, which is located on the top
of the Drawer Microwave.
Remove the feature sticker, if there is one. Check the
drawer for any damage, such as misaligned or bent
drawer, damaged drawer seals and sealing surfaces,
broken or loose Drawer Microwave guides and dents
inside the cavity or on the front side of the drawer.
If there is any damage, do not operate the Drawer
Microwave and contact your dealer.
Sealing Surface
Waveguide Cover
MODELS AVAILABLE:
ZWL1126SR
Sealing Surface
Oven Cavity
31-7000165 Rev. 0

Advertisement

Table of Contents
loading

Table of Contents