Electrolux EWF1041R9WB User Manual page 16

16 www.electrolux.com
Stain Touchpad
Press this touchpad to add the stain
phase to a program. The indicator of this
option comes on.
Use this function for laundry with hard to
remove stains.
You have 2 choices for adding stain
remover:
1. If AutoDose Detergent is Off, when
you set this function,
• put the powder stain remover into
the compartment "Manual"
(powder) together with powder
detergent or
• put the liquid stain remover into
the compartment
together with liquid detergent.
powder
2. If AutoDose Detergent is On, The
detergent is dispensed from the
AutoDose compartment. You can put
stain remover into the compartment
"Manual"
(liquid).
This function increases the program
duration.
Stain option can be combined with
temperature 40 to 90 °C only.
If you press AutoDose
while Stain option is active,
AutoDose function is switched off,
but Stain option still remains active
in manual mode.
I (liquid)
liquid
(powder) or I
button
Prewash Touchpad
Select this option if you wish your
laundry to be pre-washed before the
main wash.
Use this option for heavy soil, especially
if containing sand, dust, mud and other
solid particles.
This option increases the program
duration.
You have 2 options for adding
prewash detergent:
1. If AutoDose Detergent is Off, put
the detergent for Main wash phase
into the compartment "Manual"
(for powder) or
and pour detergent for Prewash
phase directly into the drum.
Detergent
for
Prewash
phase.
2. If AutoDose Detergent is On,
detergent is dispensed from the
AutoDose compartment during
Prewash phase. So, you do not
need to add more detergent.
Hygienic Care (
Select this option to add approximately
30 minutes of tumbling in vapour after
the rinse cycle.
• Vapour may not necessarily be visible
inside the drum during a vapour
cycle. Vapour is created below the
drum and allowed to naturally rise
into the clothes.
• Vapour may not be present during the
entire vapour cycle.
• Vapour function is more effective with
half load.
I (for liquid)
) Touchpad