Advertisement
The heating unit of the heater
(the heating film at the back of the
protection grid of the heater) may be
damaged from fall. Please confirm the
heating unit is not damaged prior to
each use. Do not use the electric heater
if the heating element is broken.
Disconnect the power plug
when moving or cleaning this appliance.
When
disconnecting
connection, first turn off the switch,
then unplug the plug. Do not yank the
power cable.
Demolition
heater with authorization is strictly
prohibited. Please look for professional
service personnel if the heater is
damaged.
Only specific personnel from
the technical service center may replace
the power cord of the product in case it
is damaged to ensure safety.
Installation
directly under wall outlet is strictly
forbidden.
Avoid the use of the heater if
children, animals or the disabled and
those who lack self-control are present
while nobody else is taking care of
them.
The appliance should not be
available
to
the
(including children): those with physical,
sensory or mental impairments, or
those
who
lack
knowledge unless they get custody or
instructions on the use of the product
from the person who is responsible for
their safety.
C hildren should be supervised
and ensured that they will not play with
this appliance.
Do not share the socket with
other electrical appliances to avoid
current overload, or fire risks may be
caused by excessive load.
C AUTION:
cooling device is prohibited to avoid
overheating, or dangerous accidents
may be caused.
Service life – 4 years.
INSTALLATION AND APPLICATION
OF THE HEATER
C heck whether the parts are
complete and the product is intact when
open the package.
If you want to use the electric
heater in a mobile way, please install
the rollers provided in the package.
Make sure the heater is correctly fixed
with the screws provided. Please make
sure the base is level, stable and clean.
Please note the safe distance mentioned
below.
the
appliance
of
the
electric
of
the
heater
following
people
experience
and
covering
of the
STEPS FOR CASTOR INSTALLATION
1. Put the product upside down on a
soft cotton cloth or carpet.
2. Mount the stand in the corresponding
location of the lower part of the product
as shown above, and then fix the
randomly supplied screw at the bottom
of the product with a screwdriver and
tighten the screw.
OPERATION NOTICE
Make sure the heater shell, line
and power plug are intact.
C heck the rated voltage in the
model label of the heater is in line with
that
of
the
requirements
frequency 50Hz, bearing current ≥10A.
Do not power the heater on until the
requirements are met.
LED display
1. Display
2. Up Key
3. Down Key
4. Turn on/power key
5. Time Key
4
outlet.
Power
are:
voltage
outlet
220V,
Advertisement
