HP-UX
This procedure must be executed from an account with root
priviledges.
To install the HP Remote 3D Receiver on HP-UX:
1. Insert and mount the HP Remote 3D Graphics Software CD.
2. Depending on the processor architecture execute:
a.
For HP-UX PA-RISC execute:
R3D_receiver_hpux_pa_1.0
b.
For HP-UX Itanium2 execute:
R3D_receiver_hpux_ipf_1.0
3. Follow the directions on the screen
Linux
This procedure must be executed from an account with root
priviledges.
To install the HP Remote 3D Receiver on Linux:
1. Insert and mount the HP Remote 3D Graphics Software CD.
2. Execute: R3D_receiver_linux_ia32_1.0
3. Follow the directions on the screen.
2
www.hp.com
Installation Guide