Installation Location - Fujitsu General AK Series Operating Manual

INSTALLATION LOCATION

WARNING
Installation Dimension
86
290
In the event of a malfunction (burning smell, etc.), immediately stop operation, disconnect the power plug, and consult
authorized service personnel.
In the place where bears be sufficient to the weight of the air conditioner concerning installation, noise and vibration
choose such place without increasing.
CAUTION
Do not use inflammable gases near the air
conditioner.
It is place where don't give neighbours trouble
about removable water or a wind and noise.
Electricity Wiring
WARNING
The power supply sets up the air conditioner exclusive use circuit and do not share with other electricity product.
In case of install to many place of moisture, please attach an electrical leakage breaker.
Removing
In case of removal and change the room, please consult to your selling agent so need a special technology.
Furthermore, in this case actual expenses needed for removing are linked.
10
In the work of this item, the authorized service personnel should work.
150
or more
600
or
more
Unit 581
This appliance shall be installed in accordance with national wiring regulations.
Wall
200
or
more
Installation hole 457~460
Consult the installation in a special place to
a selling agent.
Because sea breeze sometimes becomes to a cause of
malfunction by corrosion etc., in the case that the place
become use with machine oil, the place of many place
etc. that occur, sulfuration gas such as a hot spring area
that hits in a seashore area it buys and give consultation
to that selling agent.
Install the indoor unit and remote control
unit at least one meter from any television
sets or radio.
There is in the case that the disorder and noise of a
picture enter.
more
Unit 457
Wall
200
or