Air Conditioner Operation - Fujitsu General AK Series Operating Manual

AIR CONDITIONER OPERATION

COOLING MODEL
Power Supply
Connect the Power Supply Plug to an electrical point.
●
Connect securely, without looseness.
●
In the case of direct line connections, turn on the breaker.
MASTER CONTROL Switch
POSITION
(OFF)
FAN
SUPER QUIET
NORMAL
HIGH POWER
Cooling
To obtain maximum cooling effect in the hot summer select position HIGH POWER
on the MASTER CONTROL. Maximum moisture removal, air circulation and dust
removal are effected at the same time.
Selection of SUPER QUIET reduces operating noise.
Air Circulation
To maintain a comfortable room temperature an important factor is the circulation
of air. Room air can be circulated without cooling by selecting FAN position on the
MASTER CONTROL.
Air circulation only without cooling effect may also be achieved with the
thermostat knob turned counterclockwise to "1" position and with the MASTER
CONTROL knob at either "cool" position.
4
FUNCTION
The air conditioner is switched off.
Fan only is operating to provide filtered air without
cooling effect.
Fan speed is low and cooling efficiency is intermediate
with low noise level.
A cooling effect is obtained by a quieter operation than
"HIGH POWER".
Fan speed is at its maximum resulting in maximum
cooling effect.
MASTER CONTROL