troubleshooting
the workstation does not boot from CD-ROM or DVD drive.
Make sure...
The CD or DVD boot is enabled through the
Computer Setup utility.
A bootable CD is in the optical drive.
CD or DVD devices are not detected or driver is not loaded.
Make sure...
The drive is connected and configured
properly.
movie will not play in the DVD drive.
Make sure...
The decoder software is installed properly.
you can't eject a CD.
Make sure...
The disc is properly seated in the drive.
3–6
table 3-4. optical drive problems
How
Run the Setup program and enable booting to
removable media and verify boot order
settings.
Insert a bootable CD in the drive.
How
Refer to the
hp workstation xw5000 and xw8000
Technical Reference Guides
http://www.hp.com/go/workstationsupport
How
Install decoder software. See the "Loading
Software Applications for Your Optical Drive"
section in this guide for additional information.
How
Turn off computer and insert a thin metal rod
into the emergency eject hole and push firmly.
Slowly pull the tray out from the drive until the
tray is fully extended, then remove the CD.
at
getting started guide