troubleshooting
workstation does not start properly
the system doesn't power on.
Make sure...
The system's power cord is properly
connected.
there is a POST error.
The POST can detect errors and changes to the configuration. In either case, a code and short
description is displayed.
Make sure...
You read the message and select the
appropriate action.
3–2
The following table will assist you in resolving issues when your
workstation does not start properly.
table 3-1. system does not start properly
How
Connect the power cord to a working power
outlet and to the rear of the system.
How
• Press F1 to ignore the message and
continue.
• Press F2 to run the Setup program and
correct a system configuration error.
• Press Enter to see details about the
message. After viewing these details, you
are returned to the original POST display
screen.
Note: A list of POST errors with suggested
solutions is included in the hp workstation
xw5000 and xw8000 Technical Reference
Guides at:
http://www.hp.com/go/workstationsupport
getting started guide