Glossary - Omron F3SJ-A P Series User Manual

Glossary

Auto reset Setting status by which the safety output automatically turns ON when the F3SJ receives light after the power
is turned ON and after the F3SJ is blocked.
Auxiliary output 1 Provides an inverted signal of the safety output. This CANNOT be used for safety applications.
Detection capability Minimum size of an object that can be detected in the protective height of the F3SJ.
Effective aperture angle Range of angles for which the F3SJ can operate.
(EAA)
External device Function that detects malfunctions, such as welding, in external relays (or contactors) that control the
monitoring(EDM) hazardous area of a machine, by monitoring the operation of N.C. contact.
External Indicator Used to turn on muting lamps, etc. This CANNOT be used for safety applications.
Output
External test Function that stops emission at any time to check that the safety output is being properly turned OFF.
Interlock Function that holds the safety outputs to OFF until safety is ensured and a reset input is applied.
Key cap for muting Connector that is attached to the end cap of an emitter or receiver to use muting function.
Lockout Function that holds safety output OFF when an error is detected by the F3SJ.
Manual reset Setting status by which the safety outputs is turned ON from the interlock state by applying a reset input while
the F3SJ is receiving light.
Muting Function that temporarily disables the safety function of the F3SJ, keeping the safety output ON even if
beams are being blocked.
Muting sensor Input device, such as photoelectric sensor or proximity sensor, that inputs the timing of the start and end of
the muting function.
Override Function that forcibly turns the safety output ON when the muting function is not working.
Primary sensor Name of the F3SJ connected nearest the power supply when series-connected.
Reset Releases the interlock state/lockout state.
Response time from ON Time period from when the F3SJ is blocked until the safety output turns from ON to OFF.
to OFF
Restart interlock Enters interlock state when the F3SJ is blocked.
Safety output (OSSD) Outputs +24V when receiving light. Can be used for safety applications.
Secondary sensor Name used for F3SJ other than the primary sensor, when series-connected.
Start interlock Enters interlock after power is turned ON.
Tel : 03.26.04.20.21 - Fax : 03.26.04.28.20 - Web : http: www.audin.fr - Email : info@audin.fr
AUDIN - 8, avenue de la malle - 51370 Saint Brice Courcelles
Appendix
E
F3SJ-A
113
User's Manual