HP Visualize j6000 Supplementary Manual page 53

Table 3-1. Chassis Codes for J6000 Workstations
Ostat Code FRU
TST 4n60 SYS BD
FLT 5n00 SYS BD
FLT 5n02 SYS BD
FLT 5n04 SYS BD
FLT 5n07 SYS BD
FLT 5n08 SYS BD
FLT 5n0A SYS BD
FLT 5n0B SYS BD
FLT 5n0C SYS BD
INI 7000 DIMM
INI 7002 SYS BD
FLT 7004 SYS BD
FLT 7005 DIMM
TST 7010 DIMM
WRN 7011 DIMM
FLT 7012 DIMM
FLT 7013 DIMM
TST 7016 DIMM
WRN 7017 DIMM
FLT 701F DIMM
Chapter 3
Message
CPU n dcache miss
unknown bus err
path err assertd
data parity err
Runway dir error
Runway broad err
illegal response
bus timeout
CPU sync failure
start DIMM scan
init mem tables
mem plt upd fail
insufficient mem
check DIMM order
skip DIMM ord ck
DIMM order error
DIMM order error
DIMM pair check
skip mem pair ck
no memory found
Identifying LCD-Indicated Conditions
Description
CPU n is starting its data cache miss
self-test.
CPU n detected an unknown error on the
system bus (Runway).
CPU n detected a path error on the
system bus (Runway).
CPU n detected a data, address, or control
parity error on the system bus (Runway).
CPU n detected a directed error on the
system bus (Runway).
CPU n detected a broadcast error on the
system bus (Runway).
CPU n received data that did not match
any outstanding data request.
CPU n timed out before receiving
requested data. The responder is logged in
the system responder address.
CPU n's synchronizer detected a rule
violation on the system bus (Runway).
Start looking for installed DIMMs.
Initialize memory data structures.
Error updating memory platform data.
Insufficient memory detected to continue.
Start memory DIMM order check.
Bypass memory DIMM order check.
Memory DIMMs are not in the proper
order.
Memory DIMMs are not in the proper
order. As a result, the system cannot
access one or more DIMMs and has
deallocated all inaccessible DIMMs.
Start memory DIMM pair check (DIMMs
in a pair (e.g. 0a/0b) must match in
J7xxx).
Bypass memory DIMM set check.
Memory scan couldn't find any DIMMs.
Troubleshooting
53