Table of Contents
Advertisement
PW-AC5530U
Chapter 3 Connect to a Wireless Network
With both the hardware and software successfully installed into your computer, you can quickly
connect to a wireless network using one of the following methods.
Method One: To connect using AR171 Wireless Configuration Utility
PW-AC5530U uses the AR171 Wireless Configuration Utility as the management software. The
utility provides you an easy interface to connect to a network and to change any settings related
to the wireless adapter. For specific operations, please go to
AR171 Wireless Configuration
Method Two: To connect using WPS
By this method, you can connect to your network quickly on the condition that your Router or
access point supports WPS or QSS as is called by some other products. For specific operations,
please go to
Section 3.2 To connect using
Method Three: To connect using Windows built-in wireless utility
Windows users may use the built-in wireless utility to connect to a wireless network. For specific
operations, please go to
3.1 To connect using AR171 Wireless Configuration Utility
1.
After installation, the utility configuration page will automatically pop up on the screen. If the
utility page does not pop up, you can also launch the utility by double-clicking the
on your desktop.
2.
The Network page will display all wireless networks that are available in your area. To
connect to a network, simply highlight the wireless network name (SSID) and click
Connect. If you tick Connect automatically, the adapter will automatically connect to your
AC1200 Wireless Dual Band USB Adapter User Guide
Utility.
WPS.
Section 3.3 To connect using Windows built-in wireless
Figure 3-1
Section 3.1 To connect using
10
utility.
icon
Advertisement
Table of Contents
