HP Visualize c160 Owner's Manual page 182

C_scsi.doc 162 Tue Jul 2 14:56:06 1996
Table 26
SCSI Device Drives
Internal System Drives:
System SCSI Drive(s)
CD-ROM Drive (if present, uses ID No.2)
4-mm DDS Tape Drive
(if present, uses ID No.1)
External Device Drives
1st External Device
2nd External Device
3rd External Device
4th External Device
5th External Device
6th External Device
7th External Device
NOTICE: You can have no more than 7 single-ended SCSI devices (internal and ex-
ternal) connected to the system.
NOTICE:
SCSI Connections
Assigning SCSI Device IDs
Single-Ended SCSI Device IDs
__________________
__________________
__________________
__________________
__________________
__________________
__________________
5 Write in the SCSI device ID of any internal drives in Table 26.
6 Write in the type of external single-ended drives currently connected to your
workstation under the heading "External Device Drives" and each drive's SCSI
device ID under the heading "Device ID."
7 Add your new drive to the table if it is an external device. If it is an internal drive,
continue to Step 8.
The C1700A Magneto-Optical Autochanger uses three SCSI IDs, and
accounts for three of the seven devices allowed on the SCSI bus.
162
Device ID (Address) Number
(Only 0 through 6 Available)
Internal External
__________ N/A
__________ N/A
N/A __________
N/A __________
N/A __________
N/A __________
N/A __________
N/A __________
N/A __________
N/A __________