General Information; Inspection; Operator Manual; Installation - Saturn SHDR-60-4-36G Operation Manual

Gas range with oven
Table of Contents

Advertisement

GENERAL INFORMATION

Inspection.

Please inspect the unit on receipt. If the unit is damaged, contact the carrier
immediately and file a damage claim with them. Save all packing materials
when filing a claim.
Freight damage claims are the responsibility of the
purchaser and are not covered under warranty.

Operator Manual.

This manual contains important information for your safety and the
installation, operation, maintenance and service of this equipment.
Please read the manual carefully and ensure all operators of the
equipment are aware of the contents and safety requirements. You must
also assess all hazards and risks associated with the operation of the
equipment in your environment and advise all operators of these.

Installation.

This equipment must be installed by an authorized person in accordance
with local codes, or in the absence of local codes, with the national fuel
gas code (ANSI Z223.1), or the natural gas installation code CAN/CGA
B149.1, or the propane installation code CAN/CGA B149.2, as well as
local
gas,
electricity,
any
applicable
statutory
regulations
and
manufacturer requirements.
An approved gas shut-off valve must be installed between the main gas piping
system and the appliance. To facilitate servicing of appliance, it is advisable
to install a 3/4" pipe union between gas shut-off valve and equipment.

Gas Connection.

The appliance must be connected by an authorized person to the gas type
specified on the unit. The gas type is shown adjacent to the rear gas
connection point and on the data plate. Connect to and use only the correct
type of gas.
Gas Range Manual
Page 8
Revision: 21 Oct 2011

Advertisement

Table of Contents
loading

Table of Contents